How it's calculated
- Volume (ft³) = length (ft) × width (ft) × depth (in) ÷ 12
- With waste = volume × (1 + waste% ÷ 100)
- Weight (US short tons) = yd³ × your density (short tons/yd³)
- Bags = required yd³ ÷ material per bag → round up to a whole bag
- Bulk order = max(required, supplier minimum) → round up to the supplier increment
- Quoted total = rounded purchase quantity × your unit price + your entered fees + your entered tax
The material estimate is kept separate from the purchase plan. Bags are always rounded to whole packages. Bulk quantity is rounded only after applying the supplier minimum and increment you enter.
The comparison names a lower estimated quoted total only when both totals are complete. It does not turn missing freight, fees or tax into zero and does not claim that the lower price is the best practical choice.
Worked example
20 ft × 10 ft area, 4 in deep, 1.4 short tons/yd³, 5% waste
- Volume = 20 × 10 × 4 ÷ 12 = 66.667 ft³ = 2.4691 yd³
- With 5% waste = 2.5926 yd³ (1.982 m³)
- Weight ≈ 2.5926 × 1.4 = 3.63 US short tons
- A 0.5 ft³ bag quote rounds to whole bags; a bulk quote follows its separate minimum and increment.
Figures generated by the same functions that power the calculator and covered by automated tests.
Assumptions & limitations
- Density 1.4 US short tons/yd³ is an illustrative, editable assumption — not a universal product density.
- A weight-only bag label is converted to volume using your density entry; the bag and density must describe the same product.
- Blank costs remain unknown. Enter 0 only after confirming that a fee or tax does not apply.
- Depth is the finished depth you want; compaction can require extra loose material.
- No automatic compaction factor beyond your waste allowance.
- Weight and weight-derived bag volume are only as accurate as your density entry.
- The calculator does not evaluate delivery access, vehicle capacity, lifting, labor, storage or whether products are equivalent.
Frequently asked questions
How much does a cubic yard of gravel weigh?
It depends on stone type, gradation and moisture. Replace the illustrative density with the figure for the exact material in your quote.
Can I compare a bag sold by weight with bulk sold by volume?
Yes, but the bag volume must be derived from density. Make sure the density and bag weight refer to the same product; otherwise use a printed bag volume instead.
Why is my quoted total unknown?
At least one price, fee or tax field is blank. Blank means unknown rather than free. Enter 0 only when the supplier confirmed that charge does not apply.
Does the lower quoted total mean it is the best option?
No. The comparison covers only entered costs. Delivery access, handling, storage, time and product suitability can change the practical decision.